Saturday, October 14, 2017

300M 2.4GHz 15dBi Outdoor Wireless CPE

Model: HS-WC203

Features
• Smart polling data transmission protocol
• 170 Mbps throughput
• 80,000 PPS
• Dual-firmware image support
• IPv6 support
• Network Management System
• 64 client devices connected to a base-station
• 9dBi directional panel antenna
• IP-65 Protection

Introduction
The CPE is a very efficient, and stable 2.4 GHz CPE. This product is equipped with an high output power(up to 28 dBm) 802.11n MIMO radio wrapped securely inside a robust, well designed and a small form factor enclosure.
Equipped with dual firmware image feature, remote software upgrades are assured even if a power failure interrupts the process. The device will restart using the prior firmware in the event of an upgrade failure.

Wireless
WLAN standard IEEE 802.11 b/g/n
Radio mode MIMO 2x2
Radio frequency band 2.402 - 2.492 GHz (FCC 2.412 - 2.462 GHz)
Transmit power Up to 31 dBm (country dependent)
Receive sensitivity Varying between -96 and -74 dBm depending on modulation
Channel size 5,10, 20, 40 MHz
Modulation schemes
802.11 g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
802.11 b: DSS (CCK, DQPSK, DBPSK)
Data rates
802.11 n: 300, 270, 240, 180, 120, 90, 60, 30 Mbps
802.11 g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11 b: 11, 5.5, 2, 1 Mbps

Antenna
Type Integrated directional panel antenna
Gain 9 dBi

Wired
Interface 10/100 Base-T, RJ45

HOSUNN.com - Leading Long distance 100KM 5G Outdoor PTP Wireless Bridge manufacturer
Skype: skyattics
Email: sales@hosunn.com

Tuesday, October 3, 2017

300M 5GHz 15dBi Outdoor Wireless CPE


Features
• Smart polling data transmission protocol
• 170Mbps throughput
• 80,000 PPS
• Dual-firmware image support
• IPv6 support
• Network Management System
• 64 client devices connected to a base-station
• 15dBi directional panel antenna
• IP-65 Protection

Introduction
The CPE is a very efficient, and stable 5 GHz CPE. This product is equipped with an high output power(up to 29 dBm) 802.11n MIMO radio wrapped securely inside a robust, well designed and a small form factor enclosure.
Equipped with dual firmware image feature, remote software upgrades are assured even if a power failure interrupts the process. The device will restart using the prior firmware in the event of an upgrade failure.

Specification

Product/ distance recomendation PTP mode PTP mode (full capacity)
HS-WC5015 10 km 2km

Wireless
WLAN standard IEEE 802.11 a/n
Radio mode MIMO 2x2
Radio frequency band 5.150 - 5.850 GHz (FCC 5.150 - 5.250 and 5.725 - 5.850 GHz)
Transmit power Up to 29 dBm (country dependent)
Receive sensitivity Varying between -97 and -75 dBm depending on modulation
Channel size 5,10, 20, 40 MHz
Modulation schemes
802.11 b: DSS (CCK, DQPSK, DBPSK)
Data rates
802.11 n: 300, 270, 240, 180, 120, 90, 60, 30 Mbps
802.11 a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Duplexing scheme Time division duplex

Antenna
Type Integrated directional panel antenna
Gain 15dBi

Wired
Interface 10/100 Base-T, RJ45


HOSUNN.com - Leading Long distance 100KM 5G Outdoor PTP Wireless Bridge manufacturer
Skype: skyattics
Email: sales@hosunn.com

Long distance 5G Outdoor PTP Wireless Bridge 100KM


Features
•Wireless 5GHz 300 Mbps
•100km long distance
•220 Mbps throughput(Max)
•Wireless proprietary protocol
•28dBm output power
•latency 2ms(64bytes)
•60,000 packet per second(Max)
•Carrier,high-security video surveillance application
•PoE adapter
•Network management system
•IP-67 Ingress Protection

Introduction
The PTP is a long distance PTP wireless bridge. This product is equipped with an high output power(up to 28 dBm) 2x2 MIMO radio.Throughput up to 220Mbps(110Mbps full duplex).
Equipped with Gigabit Ethernet port, and is ideal for high-security video surveillance scenarios. PTP integrated surge and ESD protection according to IEC standards and passes Class 4 requirements.

Wireless Performance
Throughput 220 Mbps(110 Mbps Full Duplex)
60,000 packet per second(Max)
latency 2ms(64bytes)

Wireless Specification
Wireless proprietary protocol
Working mode PTP
Radio mode MIMO 2x2
Transmit power 28(+/-2) dBm
Frequency range 5.15 – 5.915 GHz
Channel size 20, 40MHz
Modulation schemes BPSK, QPSK, 16QAM, 64QAM
Receive sensitivity Varying between -94 and -72 dBm depending on modulation
Duplexing scheme TDD
Error correction FEC

Antenna
HS-WP5023R Integrated directional dual-pol 23 dBi panel
HS-WP50NR 2 N-type connectors

Wired
Network Interface 10/100/1000 Base-T (RJ45)

HOSUNN.com - Leading Long distance 100KM 5G Outdoor PTP Wireless Bridge manufacturer
Skype: skyattics
Email: sales@hosunn.com

5G Outdoor Wireless PTP Bridge Long distance 35KM


Features
• Wireless 5GHz 300 Mbps
• 35km long distance
• 220 Mbps throughput(Max)
• Wireless proprietary protocol
• 28dBm output power
• latency 2ms(64bytes)
• 60,000 packet per second(Max)
• Carrier,high-security video surveillance application
• PoE adapter
• Network management system
• IP-67 Ingress Protection

Introduction
The PTP is a long distance PTP wireless bridge. This product is equipped with an high output power(up to 28 dBm) 2x2 MIMO radio.Throughput up to 220Mbps(110Mbps full duplex).
Equipped with Gigabit Ethernet port, and is ideal for high-security video surveillance scenarios. PTP integrated surge and ESD protection according to IEC standards and passes Class 4 requirements.

Wireless Performance
Throughput 220 Mbps(110 Mbps Full Duplex)
60,000 packet per second(Max)
latency 2ms(64bytes)

Wireless Specification
Wireless proprietary protocol
Working mode PTP
Radio mode MIMO 2x2
Transmit power 28(+/-2) dBm
Frequency range 5.15 – 5.915 GHz
Channel size 20, 40MHz
Modulation schemes BPSK, QPSK, 16QAM, 64QAM
Receive sensitivity Varying between -94 and -72 dBm depending on modulation
Duplexing scheme TDD
Error correction FEC


HOSUNN.com - 5G 300M Outdoor Wireless PTP Bridge 35KM long distance
Skype:skyattics
Email: sales@hosunn.com

Sunday, September 24, 2017

Wireless mesh topology solution

Mesh topology

MG: Mesh Gateway
MP: Mesh Point
MAP: Mesh Access Point
MSTA: Mesh Station

Data path
Mesh station(MSTA) --> Mesh Point(MP) --->Mesh gateway(MG) --->WAN/LAN(Internet)

Mesh station(MSTA) --> Mesh Access Point(MAP) --->Mesh gateway(MG) --->WAN/LAN(Internet)

Features:
Advanced intelligent mesh technology
Hopping & Mesh architecture
Multi-radio options (up to 3)
Multi-frequency system (4.9GHz ~ 6.1GHz)
Flexible IP infrastructure
Fast roaming
Smart load balancing
Multiple gateway
QoS
Intelligent routes traffic within mesh network


HoSunn Tech - Wireless mesh topology solution

Saturday, September 23, 2017

Outdoor wireless PTP bridge 2.4 5G dual band for surveillance Hotspot


Model: HS-P201

Features
Application in school,hospital,warehouse,island
Enterprise,carrier level outdoor wireless PTP bridge
2.4GHz 5GHz dual band
QoS
Giga ethernet port
PoE

TX power
a. IEEE802.11a
1. 21dBm@6M(all)
2. 17dBm@54M(5180MHz)
16dBm@54M(5825MHz)

b. IEEE802.11b
1. 20dBm@1M(2412MHz)
19dBm@1M(2484MHz)
2. 21dBm@11M(all)

c. IEEE802.11g
1. 23dBm@6M(all)
2. 19dBm@54M(all)

d. IEEE802.11a/n HT20
1. 21dBm@MCS0/8(5180MHz)
19dBm@MCS0/8(5825MHz)
2. 16dBm@MCS7/15(5180MHz)
14dBm@MCS7/15(5825MHz)

e. IEEE802.11a/n HT40
1. 19dBm@MCS0/8(5190MHz)
18dBm@MCS0/8(5795MHz)
2. 13dBm@MCS7/15(all)

f. IEEE802.11g/n HT20
1. 21dBm@MCS0/8(all)
2. 17dBm@MCS7/15(all)

g. IEEE802.11g/n HT40
1. 21dBm@MCS0/8(2422MHz)
20dBm@MCS0/8(2462MHz)
2. 16dBm@MCS7/15(all)

RX sensitive
a. IEEE802.11a
1. -82dBm@6M, 1Rx
-95/-91dBm@6M, 2Rx
2. -65dBm@54M, 1Rx
-79/-75dBm@54M, 2Rx

b. IEEE802.11b
1. -82dBm@1M, 1Rx
-95/-91dBm@1M, 2Rx
2. -76dBm@11M, 1Rx
-91/-87dBm@11M, 2Rx

c. IEEE802.11g
1. -82dBm@6M, 1Rx
-95/-91dBm@6M, 2Rx
2. -65dBm@54M, 1Rx
-80/-76dBm@54M, 2Rx

d. IEEE802.11a/n HT20
1. -82dBm@MCS0, 1Rx
-95/-91dBm@MCS0, 2Rx
2. -64dBm@MCS7, 1Rx
-77/-73dBm@MCS7, 2Rx

e. IEEE802.11a/n HT40
1. -79dBm@MCS0, 1Rx
-91/-87dBm@MCS0, 2Rx
2. -61dBm@MCS7, 1Rx
-74/-70dBm@MCS7, 2Rx

f. IEEE802.11g/n HT20
1. -82dBm@MCS0, 1Rx
-95/-91dBm@MCS0, 2Rx
2. -64dBm@MCS7, 1Rx
-77/-73dBm@MCS7, 2Rx

g. IEEE802.11g/n HT40
1. -79dBm@MCS0, 1Rx
-90/-86dBm@MCS0, 2Rx
2. -61dBm@MCS7, 1Rx
-74/-71dBm@MCS7, 2Rx


HoSunn Tech - Outdoor wireless 2.4 5G dual band PTP bridge

Monday, May 27, 2013

GPS Antenna with Low Noise Amplifier and 28 ±2dB Typical LNA Gain


GPS Antenna with Low Noise Amplifier and 28 ±2dB Typical LNA Gain

Model Number: GPS+GSM+WIFI Antenna -- JCE046-1




Key Specifications/Special Features:

GPS part:
Voltage: 2.2 to 5V
Current: 5 to 15mA
Center frequency: 1575.42 ±3MHz
VSWR: 1.5:1
Bandwidth: ±5MHz
Impedance: 50Ω
Polarization type: RHCP LNA or filter
Typical LNA gain: 28 ±2dB (without cable)
Noise figure: 1.5dB
Size: 80 x 15mm
GSM part:
Frequency:
824 to 894 or 1710 to 1990MHz
880 to 960 or 1710 to 1990MHz
VSWR: 2.0:1 (5m)
Impedance: 50Ω
Typical gain: 2dBi
Wi-Fi part:
Frequency: 2400 to 2500MHz
VSWR: 2.0:1 (5m)
Impedance: 50Ω
Typical gain: 3dBi
Cable: RG174, 3 or 5m
Connectors: SMA, SMB or MCX
Housing color: black
Environment:
Working temperature: -40 to 85°C
Working humidity: 55 to 75%RH
Waterproof grade: IP67

Jinchang - Leading GPS Antennas China Manufacturer